From 046c9caacdd546fb5c144b3056c229e5ef9c4f5f Mon Sep 17 00:00:00 2001
From: lwb <q3213421wrwqr>
Date: 星期四, 04 三月 2021 15:28:32 +0800
Subject: [PATCH] opus 属于公共库，放入unity管理
---
/dev/null | 0
1 files changed, 0 insertions(+), 0 deletions(-)
diff --git a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus.h b/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus.h
deleted file mode 100644
index 5be73dd..0000000
--- a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus.h
+++ /dev/null
@@ -1,981 +0,0 @@
-/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited
- Written by Jean-Marc Valin and Koen Vos */
-/*
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/**
- * @file opus.h
- * @brief Opus reference implementation API
- */
-
-#ifndef OPUS_H
-#define OPUS_H
-
-#include "opus_types.h"
-#include "opus_defines.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @mainpage Opus
- *
- * The Opus codec is designed for interactive speech and audio transmission over the Internet.
- * It is designed by the IETF Codec Working Group and incorporates technology from
- * Skype's SILK codec and Xiph.Org's CELT codec.
- *
- * The Opus codec is designed to handle a wide range of interactive audio applications,
- * including Voice over IP, videoconferencing, in-game chat, and even remote live music
- * performances. It can scale from low bit-rate narrowband speech to very high quality
- * stereo music. Its main features are:
-
- * @li Sampling rates from 8 to 48 kHz
- * @li Bit-rates from 6 kb/s to 510 kb/s
- * @li Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
- * @li Audio bandwidth from narrowband to full-band
- * @li Support for speech and music
- * @li Support for mono and stereo
- * @li Support for multichannel (up to 255 channels)
- * @li Frame sizes from 2.5 ms to 60 ms
- * @li Good loss robustness and packet loss concealment (PLC)
- * @li Floating point and fixed-point implementation
- *
- * Documentation sections:
- * @li @ref opus_encoder
- * @li @ref opus_decoder
- * @li @ref opus_repacketizer
- * @li @ref opus_multistream
- * @li @ref opus_libinfo
- * @li @ref opus_custom
- */
-
-/** @defgroup opus_encoder Opus Encoder
- * @{
- *
- * @brief This page describes the process and functions used to encode Opus.
- *
- * Since Opus is a stateful codec, the encoding process starts with creating an encoder
- * state. This can be done with:
- *
- * @code
- * int error;
- * OpusEncoder *enc;
- * enc = opus_encoder_create(Fs, channels, application, &error);
- * @endcode
- *
- * From this point, @c enc can be used for encoding an audio stream. An encoder state
- * @b must @b not be used for more than one stream at the same time. Similarly, the encoder
- * state @b must @b not be re-initialized for each frame.
- *
- * While opus_encoder_create() allocates memory for the state, it's also possible
- * to initialize pre-allocated memory:
- *
- * @code
- * int size;
- * int error;
- * OpusEncoder *enc;
- * size = opus_encoder_get_size(channels);
- * enc = malloc(size);
- * error = opus_encoder_init(enc, Fs, channels, application);
- * @endcode
- *
- * where opus_encoder_get_size() returns the required size for the encoder state. Note that
- * future versions of this code may change the size, so no assuptions should be made about it.
- *
- * The encoder state is always continuous in memory and only a shallow copy is sufficient
- * to copy it (e.g. memcpy())
- *
- * It is possible to change some of the encoder's settings using the opus_encoder_ctl()
- * interface. All these settings already default to the recommended value, so they should
- * only be changed when necessary. The most common settings one may want to change are:
- *
- * @code
- * opus_encoder_ctl(enc, OPUS_SET_BITRATE(bitrate));
- * opus_encoder_ctl(enc, OPUS_SET_COMPLEXITY(complexity));
- * opus_encoder_ctl(enc, OPUS_SET_SIGNAL(signal_type));
- * @endcode
- *
- * where
- *
- * @arg bitrate is in bits per second (b/s)
- * @arg complexity is a value from 1 to 10, where 1 is the lowest complexity and 10 is the highest
- * @arg signal_type is either OPUS_AUTO (default), OPUS_SIGNAL_VOICE, or OPUS_SIGNAL_MUSIC
- *
- * See @ref opus_encoderctls and @ref opus_genericctls for a complete list of parameters that can be set or queried. Most parameters can be set or changed at any time during a stream.
- *
- * To encode a frame, opus_encode() or opus_encode_float() must be called with exactly one frame (2.5, 5, 10, 20, 40 or 60 ms) of audio data:
- * @code
- * len = opus_encode(enc, audio_frame, frame_size, packet, max_packet);
- * @endcode
- *
- * where
- * <ul>
- * <li>audio_frame is the audio data in opus_int16 (or float for opus_encode_float())</li>
- * <li>frame_size is the duration of the frame in samples (per channel)</li>
- * <li>packet is the byte array to which the compressed data is written</li>
- * <li>max_packet is the maximum number of bytes that can be written in the packet (4000 bytes is recommended).
- * Do not use max_packet to control VBR target bitrate, instead use the #OPUS_SET_BITRATE CTL.</li>
- * </ul>
- *
- * opus_encode() and opus_encode_float() return the number of bytes actually written to the packet.
- * The return value <b>can be negative</b>, which indicates that an error has occurred. If the return value
- * is 2 bytes or less, then the packet does not need to be transmitted (DTX).
- *
- * Once the encoder state if no longer needed, it can be destroyed with
- *
- * @code
- * opus_encoder_destroy(enc);
- * @endcode
- *
- * If the encoder was created with opus_encoder_init() rather than opus_encoder_create(),
- * then no action is required aside from potentially freeing the memory that was manually
- * allocated for it (calling free(enc) for the example above)
- *
- */
-
-/** Opus encoder state.
- * This contains the complete state of an Opus encoder.
- * It is position independent and can be freely copied.
- * @see opus_encoder_create,opus_encoder_init
- */
-typedef struct OpusEncoder OpusEncoder;
-
-/** Gets the size of an <code>OpusEncoder</code> structure.
- * @param[in] channels <tt>int</tt>: Number of channels.
- * This must be 1 or 2.
- * @returns The size in bytes.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_encoder_get_size(int channels);
-
-/**
- */
-
-/** Allocates and initializes an encoder state.
- * There are three coding modes:
- *
- * @ref OPUS_APPLICATION_VOIP gives best quality at a given bitrate for voice
- * signals. It enhances the input signal by high-pass filtering and
- * emphasizing formants and harmonics. Optionally it includes in-band
- * forward error correction to protect against packet loss. Use this
- * mode for typical VoIP applications. Because of the enhancement,
- * even at high bitrates the output may sound different from the input.
- *
- * @ref OPUS_APPLICATION_AUDIO gives best quality at a given bitrate for most
- * non-voice signals like music. Use this mode for music and mixed
- * (music/voice) content, broadcast, and applications requiring less
- * than 15 ms of coding delay.
- *
- * @ref OPUS_APPLICATION_RESTRICTED_LOWDELAY configures low-delay mode that
- * disables the speech-optimized mode in exchange for slightly reduced delay.
- * This mode can only be set on an newly initialized or freshly reset encoder
- * because it changes the codec delay.
- *
- * This is useful when the caller knows that the speech-optimized modes will not be needed (use with caution).
- * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz)
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal
- * @param [in] application <tt>int</tt>: Coding mode (@ref OPUS_APPLICATION_VOIP/@ref OPUS_APPLICATION_AUDIO/@ref OPUS_APPLICATION_RESTRICTED_LOWDELAY)
- * @param [out] error <tt>int*</tt>: @ref opus_errorcodes
- * @note Regardless of the sampling rate and number channels selected, the Opus encoder
- * can switch to a lower audio bandwidth or number of channels if the bitrate
- * selected is too low. This also means that it is safe to always use 48 kHz stereo input
- * and let the encoder optimize the encoding.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusEncoder *opus_encoder_create(
- opus_int32 Fs,
- int channels,
- int application,
- int *error
-);
-
-/** Initializes a previously allocated encoder state
- * The memory pointed to by st must be at least the size returned by opus_encoder_get_size().
- * This is intended for applications which use their own allocator instead of malloc.
- * @see opus_encoder_create(),opus_encoder_get_size()
- * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
- * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
- * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz)
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal
- * @param [in] application <tt>int</tt>: Coding mode (OPUS_APPLICATION_VOIP/OPUS_APPLICATION_AUDIO/OPUS_APPLICATION_RESTRICTED_LOWDELAY)
- * @retval #OPUS_OK Success or @ref opus_errorcodes
- */
-OPUS_EXPORT int opus_encoder_init(
- OpusEncoder *st,
- opus_int32 Fs,
- int channels,
- int application
-) OPUS_ARG_NONNULL(1);
-
-/** Encodes an Opus frame.
- * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
- * @param [in] pcm <tt>opus_int16*</tt>: Input signal (interleaved if 2 channels). length is frame_size*channels*sizeof(opus_int16)
- * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the
- * input signal.
- * This must be an Opus frame size for
- * the encoder's sampling rate.
- * For example, at 48 kHz the permitted
- * values are 120, 240, 480, 960, 1920,
- * and 2880.
- * Passing in a duration of less than
- * 10 ms (480 samples at 48 kHz) will
- * prevent the encoder from using the LPC
- * or hybrid modes.
- * @param [out] data <tt>unsigned char*</tt>: Output payload.
- * This must contain storage for at
- * least \a max_data_bytes.
- * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
- * memory for the output
- * payload. This may be
- * used to impose an upper limit on
- * the instant bitrate, but should
- * not be used as the only bitrate
- * control. Use #OPUS_SET_BITRATE to
- * control the bitrate.
- * @returns The length of the encoded packet (in bytes) on success or a
- * negative error code (see @ref opus_errorcodes) on failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode(
- OpusEncoder *st,
- const opus_int16 *pcm,
- int frame_size,
- unsigned char *data,
- opus_int32 max_data_bytes
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
-
-/** Encodes an Opus frame from floating point input.
- * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
- * @param [in] pcm <tt>float*</tt>: Input in float format (interleaved if 2 channels), with a normal range of +/-1.0.
- * Samples with a range beyond +/-1.0 are supported but will
- * be clipped by decoders using the integer API and should
- * only be used if it is known that the far end supports
- * extended dynamic range.
- * length is frame_size*channels*sizeof(float)
- * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the
- * input signal.
- * This must be an Opus frame size for
- * the encoder's sampling rate.
- * For example, at 48 kHz the permitted
- * values are 120, 240, 480, 960, 1920,
- * and 2880.
- * Passing in a duration of less than
- * 10 ms (480 samples at 48 kHz) will
- * prevent the encoder from using the LPC
- * or hybrid modes.
- * @param [out] data <tt>unsigned char*</tt>: Output payload.
- * This must contain storage for at
- * least \a max_data_bytes.
- * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
- * memory for the output
- * payload. This may be
- * used to impose an upper limit on
- * the instant bitrate, but should
- * not be used as the only bitrate
- * control. Use #OPUS_SET_BITRATE to
- * control the bitrate.
- * @returns The length of the encoded packet (in bytes) on success or a
- * negative error code (see @ref opus_errorcodes) on failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode_float(
- OpusEncoder *st,
- const float *pcm,
- int frame_size,
- unsigned char *data,
- opus_int32 max_data_bytes
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
-
-/** Frees an <code>OpusEncoder</code> allocated by opus_encoder_create().
- * @param[in] st <tt>OpusEncoder*</tt>: State to be freed.
- */
-OPUS_EXPORT void opus_encoder_destroy(OpusEncoder *st);
-
-/** Perform a CTL function on an Opus encoder.
- *
- * Generally the request and subsequent arguments are generated
- * by a convenience macro.
- * @param st <tt>OpusEncoder*</tt>: Encoder state.
- * @param request This and all remaining parameters should be replaced by one
- * of the convenience macros in @ref opus_genericctls or
- * @ref opus_encoderctls.
- * @see opus_genericctls
- * @see opus_encoderctls
- */
-OPUS_EXPORT int opus_encoder_ctl(OpusEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
-/**@}*/
-
-/** @defgroup opus_decoder Opus Decoder
- * @{
- *
- * @brief This page describes the process and functions used to decode Opus.
- *
- * The decoding process also starts with creating a decoder
- * state. This can be done with:
- * @code
- * int error;
- * OpusDecoder *dec;
- * dec = opus_decoder_create(Fs, channels, &error);
- * @endcode
- * where
- * @li Fs is the sampling rate and must be 8000, 12000, 16000, 24000, or 48000
- * @li channels is the number of channels (1 or 2)
- * @li error will hold the error code in case of failure (or #OPUS_OK on success)
- * @li the return value is a newly created decoder state to be used for decoding
- *
- * While opus_decoder_create() allocates memory for the state, it's also possible
- * to initialize pre-allocated memory:
- * @code
- * int size;
- * int error;
- * OpusDecoder *dec;
- * size = opus_decoder_get_size(channels);
- * dec = malloc(size);
- * error = opus_decoder_init(dec, Fs, channels);
- * @endcode
- * where opus_decoder_get_size() returns the required size for the decoder state. Note that
- * future versions of this code may change the size, so no assuptions should be made about it.
- *
- * The decoder state is always continuous in memory and only a shallow copy is sufficient
- * to copy it (e.g. memcpy())
- *
- * To decode a frame, opus_decode() or opus_decode_float() must be called with a packet of compressed audio data:
- * @code
- * frame_size = opus_decode(dec, packet, len, decoded, max_size, 0);
- * @endcode
- * where
- *
- * @li packet is the byte array containing the compressed data
- * @li len is the exact number of bytes contained in the packet
- * @li decoded is the decoded audio data in opus_int16 (or float for opus_decode_float())
- * @li max_size is the max duration of the frame in samples (per channel) that can fit into the decoded_frame array
- *
- * opus_decode() and opus_decode_float() return the number of samples (per channel) decoded from the packet.
- * If that value is negative, then an error has occurred. This can occur if the packet is corrupted or if the audio
- * buffer is too small to hold the decoded audio.
- *
- * Opus is a stateful codec with overlapping blocks and as a result Opus
- * packets are not coded independently of each other. Packets must be
- * passed into the decoder serially and in the correct order for a correct
- * decode. Lost packets can be replaced with loss concealment by calling
- * the decoder with a null pointer and zero length for the missing packet.
- *
- * A single codec state may only be accessed from a single thread at
- * a time and any required locking must be performed by the caller. Separate
- * streams must be decoded with separate decoder states and can be decoded
- * in parallel unless the library was compiled with NONTHREADSAFE_PSEUDOSTACK
- * defined.
- *
- */
-
-/** Opus decoder state.
- * This contains the complete state of an Opus decoder.
- * It is position independent and can be freely copied.
- * @see opus_decoder_create,opus_decoder_init
- */
-typedef struct OpusDecoder OpusDecoder;
-
-/** Gets the size of an <code>OpusDecoder</code> structure.
- * @param [in] channels <tt>int</tt>: Number of channels.
- * This must be 1 or 2.
- * @returns The size in bytes.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_size(int channels);
-
-/** Allocates and initializes a decoder state.
- * @param [in] Fs <tt>opus_int32</tt>: Sample rate to decode at (Hz).
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode
- * @param [out] error <tt>int*</tt>: #OPUS_OK Success or @ref opus_errorcodes
- *
- * Internally Opus stores data at 48000 Hz, so that should be the default
- * value for Fs. However, the decoder can efficiently decode to buffers
- * at 8, 12, 16, and 24 kHz so if for some reason the caller cannot use
- * data at the full sample rate, or knows the compressed data doesn't
- * use the full frequency range, it can request decoding at a reduced
- * rate. Likewise, the decoder is capable of filling in either mono or
- * interleaved stereo pcm buffers, at the caller's request.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusDecoder *opus_decoder_create(
- opus_int32 Fs,
- int channels,
- int *error
-);
-
-/** Initializes a previously allocated decoder state.
- * The state must be at least the size returned by opus_decoder_get_size().
- * This is intended for applications which use their own allocator instead of malloc. @see opus_decoder_create,opus_decoder_get_size
- * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
- * @param [in] st <tt>OpusDecoder*</tt>: Decoder state.
- * @param [in] Fs <tt>opus_int32</tt>: Sampling rate to decode to (Hz).
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode
- * @retval #OPUS_OK Success or @ref opus_errorcodes
- */
-OPUS_EXPORT int opus_decoder_init(
- OpusDecoder *st,
- opus_int32 Fs,
- int channels
-) OPUS_ARG_NONNULL(1);
-
-/** Decode an Opus packet.
- * @param [in] st <tt>OpusDecoder*</tt>: Decoder state
- * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
- * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload*
- * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length
- * is frame_size*channels*sizeof(opus_int16)
- * @param [in] frame_size Number of samples per channel of available space in \a pcm.
- * If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will
- * not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1),
- * then frame_size needs to be exactly the duration of audio that is missing, otherwise the
- * decoder will not be in the optimal state to decode the next incoming packet. For the PLC and
- * FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms.
- * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be
- * decoded. If no such data is available, the frame is decoded as if it were lost.
- * @returns Number of decoded samples or @ref opus_errorcodes
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode(
- OpusDecoder *st,
- const unsigned char *data,
- opus_int32 len,
- opus_int16 *pcm,
- int frame_size,
- int decode_fec
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Decode an Opus packet with floating point output.
- * @param [in] st <tt>OpusDecoder*</tt>: Decoder state
- * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
- * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload
- * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length
- * is frame_size*channels*sizeof(float)
- * @param [in] frame_size Number of samples per channel of available space in \a pcm.
- * If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will
- * not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1),
- * then frame_size needs to be exactly the duration of audio that is missing, otherwise the
- * decoder will not be in the optimal state to decode the next incoming packet. For the PLC and
- * FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms.
- * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be
- * decoded. If no such data is available the frame is decoded as if it were lost.
- * @returns Number of decoded samples or @ref opus_errorcodes
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode_float(
- OpusDecoder *st,
- const unsigned char *data,
- opus_int32 len,
- float *pcm,
- int frame_size,
- int decode_fec
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Perform a CTL function on an Opus decoder.
- *
- * Generally the request and subsequent arguments are generated
- * by a convenience macro.
- * @param st <tt>OpusDecoder*</tt>: Decoder state.
- * @param request This and all remaining parameters should be replaced by one
- * of the convenience macros in @ref opus_genericctls or
- * @ref opus_decoderctls.
- * @see opus_genericctls
- * @see opus_decoderctls
- */
-OPUS_EXPORT int opus_decoder_ctl(OpusDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
-
-/** Frees an <code>OpusDecoder</code> allocated by opus_decoder_create().
- * @param[in] st <tt>OpusDecoder*</tt>: State to be freed.
- */
-OPUS_EXPORT void opus_decoder_destroy(OpusDecoder *st);
-
-/** Parse an opus packet into one or more frames.
- * Opus_decode will perform this operation internally so most applications do
- * not need to use this function.
- * This function does not copy the frames, the returned pointers are pointers into
- * the input packet.
- * @param [in] data <tt>char*</tt>: Opus packet to be parsed
- * @param [in] len <tt>opus_int32</tt>: size of data
- * @param [out] out_toc <tt>char*</tt>: TOC pointer
- * @param [out] frames <tt>char*[48]</tt> encapsulated frames
- * @param [out] size <tt>opus_int16[48]</tt> sizes of the encapsulated frames
- * @param [out] payload_offset <tt>int*</tt>: returns the position of the payload within the packet (in bytes)
- * @returns number of frames
- */
-OPUS_EXPORT int opus_packet_parse(
- const unsigned char *data,
- opus_int32 len,
- unsigned char *out_toc,
- const unsigned char *frames[48],
- opus_int16 size[48],
- int *payload_offset
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Gets the bandwidth of an Opus packet.
- * @param [in] data <tt>char*</tt>: Opus packet
- * @retval OPUS_BANDWIDTH_NARROWBAND Narrowband (4kHz bandpass)
- * @retval OPUS_BANDWIDTH_MEDIUMBAND Mediumband (6kHz bandpass)
- * @retval OPUS_BANDWIDTH_WIDEBAND Wideband (8kHz bandpass)
- * @retval OPUS_BANDWIDTH_SUPERWIDEBAND Superwideband (12kHz bandpass)
- * @retval OPUS_BANDWIDTH_FULLBAND Fullband (20kHz bandpass)
- * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_bandwidth(const unsigned char *data) OPUS_ARG_NONNULL(1);
-
-/** Gets the number of samples per frame from an Opus packet.
- * @param [in] data <tt>char*</tt>: Opus packet.
- * This must contain at least one byte of
- * data.
- * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz.
- * This must be a multiple of 400, or
- * inaccurate results will be returned.
- * @returns Number of samples per frame.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_samples_per_frame(const unsigned char *data, opus_int32 Fs) OPUS_ARG_NONNULL(1);
-
-/** Gets the number of channels from an Opus packet.
- * @param [in] data <tt>char*</tt>: Opus packet
- * @returns Number of channels
- * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_channels(const unsigned char *data) OPUS_ARG_NONNULL(1);
-
-/** Gets the number of frames in an Opus packet.
- * @param [in] packet <tt>char*</tt>: Opus packet
- * @param [in] len <tt>opus_int32</tt>: Length of packet
- * @returns Number of frames
- * @retval OPUS_BAD_ARG Insufficient data was passed to the function
- * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_frames(const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1);
-
-/** Gets the number of samples of an Opus packet.
- * @param [in] packet <tt>char*</tt>: Opus packet
- * @param [in] len <tt>opus_int32</tt>: Length of packet
- * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz.
- * This must be a multiple of 400, or
- * inaccurate results will be returned.
- * @returns Number of samples
- * @retval OPUS_BAD_ARG Insufficient data was passed to the function
- * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_samples(const unsigned char packet[], opus_int32 len, opus_int32 Fs) OPUS_ARG_NONNULL(1);
-
-/** Gets the number of samples of an Opus packet.
- * @param [in] dec <tt>OpusDecoder*</tt>: Decoder state
- * @param [in] packet <tt>char*</tt>: Opus packet
- * @param [in] len <tt>opus_int32</tt>: Length of packet
- * @returns Number of samples
- * @retval OPUS_BAD_ARG Insufficient data was passed to the function
- * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_nb_samples(const OpusDecoder *dec, const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
-
-/** Applies soft-clipping to bring a float signal within the [-1,1] range. If
- * the signal is already in that range, nothing is done. If there are values
- * outside of [-1,1], then the signal is clipped as smoothly as possible to
- * both fit in the range and avoid creating excessive distortion in the
- * process.
- * @param [in,out] pcm <tt>float*</tt>: Input PCM and modified PCM
- * @param [in] frame_size <tt>int</tt> Number of samples per channel to process
- * @param [in] channels <tt>int</tt>: Number of channels
- * @param [in,out] softclip_mem <tt>float*</tt>: State memory for the soft clipping process (one float per channel, initialized to zero)
- */
-OPUS_EXPORT void opus_pcm_soft_clip(float *pcm, int frame_size, int channels, float *softclip_mem);
-
-
-/**@}*/
-
-/** @defgroup opus_repacketizer Repacketizer
- * @{
- *
- * The repacketizer can be used to merge multiple Opus packets into a single
- * packet or alternatively to split Opus packets that have previously been
- * merged. Splitting valid Opus packets is always guaranteed to succeed,
- * whereas merging valid packets only succeeds if all frames have the same
- * mode, bandwidth, and frame size, and when the total duration of the merged
- * packet is no more than 120 ms. The 120 ms limit comes from the
- * specification and limits decoder memory requirements at a point where
- * framing overhead becomes negligible.
- *
- * The repacketizer currently only operates on elementary Opus
- * streams. It will not manipualte multistream packets successfully, except in
- * the degenerate case where they consist of data from a single stream.
- *
- * The repacketizing process starts with creating a repacketizer state, either
- * by calling opus_repacketizer_create() or by allocating the memory yourself,
- * e.g.,
- * @code
- * OpusRepacketizer *rp;
- * rp = (OpusRepacketizer*)malloc(opus_repacketizer_get_size());
- * if (rp != NULL)
- * opus_repacketizer_init(rp);
- * @endcode
- *
- * Then the application should submit packets with opus_repacketizer_cat(),
- * extract new packets with opus_repacketizer_out() or
- * opus_repacketizer_out_range(), and then reset the state for the next set of
- * input packets via opus_repacketizer_init().
- *
- * For example, to split a sequence of packets into individual frames:
- * @code
- * unsigned char *data;
- * int len;
- * while (get_next_packet(&data, &len))
- * {
- * unsigned char out[1276];
- * opus_int32 out_len;
- * int nb_frames;
- * int err;
- * int i;
- * err = opus_repacketizer_cat(rp, data, len);
- * if (err != OPUS_OK)
- * {
- * release_packet(data);
- * return err;
- * }
- * nb_frames = opus_repacketizer_get_nb_frames(rp);
- * for (i = 0; i < nb_frames; i++)
- * {
- * out_len = opus_repacketizer_out_range(rp, i, i+1, out, sizeof(out));
- * if (out_len < 0)
- * {
- * release_packet(data);
- * return (int)out_len;
- * }
- * output_next_packet(out, out_len);
- * }
- * opus_repacketizer_init(rp);
- * release_packet(data);
- * }
- * @endcode
- *
- * Alternatively, to combine a sequence of frames into packets that each
- * contain up to <code>TARGET_DURATION_MS</code> milliseconds of data:
- * @code
- * // The maximum number of packets with duration TARGET_DURATION_MS occurs
- * // when the frame size is 2.5 ms, for a total of (TARGET_DURATION_MS*2/5)
- * // packets.
- * unsigned char *data[(TARGET_DURATION_MS*2/5)+1];
- * opus_int32 len[(TARGET_DURATION_MS*2/5)+1];
- * int nb_packets;
- * unsigned char out[1277*(TARGET_DURATION_MS*2/2)];
- * opus_int32 out_len;
- * int prev_toc;
- * nb_packets = 0;
- * while (get_next_packet(data+nb_packets, len+nb_packets))
- * {
- * int nb_frames;
- * int err;
- * nb_frames = opus_packet_get_nb_frames(data[nb_packets], len[nb_packets]);
- * if (nb_frames < 1)
- * {
- * release_packets(data, nb_packets+1);
- * return nb_frames;
- * }
- * nb_frames += opus_repacketizer_get_nb_frames(rp);
- * // If adding the next packet would exceed our target, or it has an
- * // incompatible TOC sequence, output the packets we already have before
- * // submitting it.
- * // N.B., The nb_packets > 0 check ensures we've submitted at least one
- * // packet since the last call to opus_repacketizer_init(). Otherwise a
- * // single packet longer than TARGET_DURATION_MS would cause us to try to
- * // output an (invalid) empty packet. It also ensures that prev_toc has
- * // been set to a valid value. Additionally, len[nb_packets] > 0 is
- * // guaranteed by the call to opus_packet_get_nb_frames() above, so the
- * // reference to data[nb_packets][0] should be valid.
- * if (nb_packets > 0 && (
- * ((prev_toc & 0xFC) != (data[nb_packets][0] & 0xFC)) ||
- * opus_packet_get_samples_per_frame(data[nb_packets], 48000)*nb_frames >
- * TARGET_DURATION_MS*48))
- * {
- * out_len = opus_repacketizer_out(rp, out, sizeof(out));
- * if (out_len < 0)
- * {
- * release_packets(data, nb_packets+1);
- * return (int)out_len;
- * }
- * output_next_packet(out, out_len);
- * opus_repacketizer_init(rp);
- * release_packets(data, nb_packets);
- * data[0] = data[nb_packets];
- * len[0] = len[nb_packets];
- * nb_packets = 0;
- * }
- * err = opus_repacketizer_cat(rp, data[nb_packets], len[nb_packets]);
- * if (err != OPUS_OK)
- * {
- * release_packets(data, nb_packets+1);
- * return err;
- * }
- * prev_toc = data[nb_packets][0];
- * nb_packets++;
- * }
- * // Output the final, partial packet.
- * if (nb_packets > 0)
- * {
- * out_len = opus_repacketizer_out(rp, out, sizeof(out));
- * release_packets(data, nb_packets);
- * if (out_len < 0)
- * return (int)out_len;
- * output_next_packet(out, out_len);
- * }
- * @endcode
- *
- * An alternate way of merging packets is to simply call opus_repacketizer_cat()
- * unconditionally until it fails. At that point, the merged packet can be
- * obtained with opus_repacketizer_out() and the input packet for which
- * opus_repacketizer_cat() needs to be re-added to a newly reinitialized
- * repacketizer state.
- */
-
-typedef struct OpusRepacketizer OpusRepacketizer;
-
-/** Gets the size of an <code>OpusRepacketizer</code> structure.
- * @returns The size in bytes.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_size(void);
-
-/** (Re)initializes a previously allocated repacketizer state.
- * The state must be at least the size returned by opus_repacketizer_get_size().
- * This can be used for applications which use their own allocator instead of
- * malloc().
- * It must also be called to reset the queue of packets waiting to be
- * repacketized, which is necessary if the maximum packet duration of 120 ms
- * is reached or if you wish to submit packets with a different Opus
- * configuration (coding mode, audio bandwidth, frame size, or channel count).
- * Failure to do so will prevent a new packet from being added with
- * opus_repacketizer_cat().
- * @see opus_repacketizer_create
- * @see opus_repacketizer_get_size
- * @see opus_repacketizer_cat
- * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to
- * (re)initialize.
- * @returns A pointer to the same repacketizer state that was passed in.
- */
-OPUS_EXPORT OpusRepacketizer *opus_repacketizer_init(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1);
-
-/** Allocates memory and initializes the new repacketizer with
- * opus_repacketizer_init().
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusRepacketizer *opus_repacketizer_create(void);
-
-/** Frees an <code>OpusRepacketizer</code> allocated by
- * opus_repacketizer_create().
- * @param[in] rp <tt>OpusRepacketizer*</tt>: State to be freed.
- */
-OPUS_EXPORT void opus_repacketizer_destroy(OpusRepacketizer *rp);
-
-/** Add a packet to the current repacketizer state.
- * This packet must match the configuration of any packets already submitted
- * for repacketization since the last call to opus_repacketizer_init().
- * This means that it must have the same coding mode, audio bandwidth, frame
- * size, and channel count.
- * This can be checked in advance by examining the top 6 bits of the first
- * byte of the packet, and ensuring they match the top 6 bits of the first
- * byte of any previously submitted packet.
- * The total duration of audio in the repacketizer state also must not exceed
- * 120 ms, the maximum duration of a single packet, after adding this packet.
- *
- * The contents of the current repacketizer state can be extracted into new
- * packets using opus_repacketizer_out() or opus_repacketizer_out_range().
- *
- * In order to add a packet with a different configuration or to add more
- * audio beyond 120 ms, you must clear the repacketizer state by calling
- * opus_repacketizer_init().
- * If a packet is too large to add to the current repacketizer state, no part
- * of it is added, even if it contains multiple frames, some of which might
- * fit.
- * If you wish to be able to add parts of such packets, you should first use
- * another repacketizer to split the packet into pieces and add them
- * individually.
- * @see opus_repacketizer_out_range
- * @see opus_repacketizer_out
- * @see opus_repacketizer_init
- * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to which to
- * add the packet.
- * @param[in] data <tt>const unsigned char*</tt>: The packet data.
- * The application must ensure
- * this pointer remains valid
- * until the next call to
- * opus_repacketizer_init() or
- * opus_repacketizer_destroy().
- * @param len <tt>opus_int32</tt>: The number of bytes in the packet data.
- * @returns An error code indicating whether or not the operation succeeded.
- * @retval #OPUS_OK The packet's contents have been added to the repacketizer
- * state.
- * @retval #OPUS_INVALID_PACKET The packet did not have a valid TOC sequence,
- * the packet's TOC sequence was not compatible
- * with previously submitted packets (because
- * the coding mode, audio bandwidth, frame size,
- * or channel count did not match), or adding
- * this packet would increase the total amount of
- * audio stored in the repacketizer state to more
- * than 120 ms.
- */
-OPUS_EXPORT int opus_repacketizer_cat(OpusRepacketizer *rp, const unsigned char *data, opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
-
-
-/** Construct a new packet from data previously submitted to the repacketizer
- * state via opus_repacketizer_cat().
- * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to
- * construct the new packet.
- * @param begin <tt>int</tt>: The index of the first frame in the current
- * repacketizer state to include in the output.
- * @param end <tt>int</tt>: One past the index of the last frame in the
- * current repacketizer state to include in the
- * output.
- * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to
- * store the output packet.
- * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in
- * the output buffer. In order to guarantee
- * success, this should be at least
- * <code>1276</code> for a single frame,
- * or for multiple frames,
- * <code>1277*(end-begin)</code>.
- * However, <code>1*(end-begin)</code> plus
- * the size of all packet data submitted to
- * the repacketizer since the last call to
- * opus_repacketizer_init() or
- * opus_repacketizer_create() is also
- * sufficient, and possibly much smaller.
- * @returns The total size of the output packet on success, or an error code
- * on failure.
- * @retval #OPUS_BAD_ARG <code>[begin,end)</code> was an invalid range of
- * frames (begin < 0, begin >= end, or end >
- * opus_repacketizer_get_nb_frames()).
- * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the
- * complete output packet.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out_range(OpusRepacketizer *rp, int begin, int end, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Return the total number of frames contained in packet data submitted to
- * the repacketizer state so far via opus_repacketizer_cat() since the last
- * call to opus_repacketizer_init() or opus_repacketizer_create().
- * This defines the valid range of packets that can be extracted with
- * opus_repacketizer_out_range() or opus_repacketizer_out().
- * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state containing the
- * frames.
- * @returns The total number of frames contained in the packet data submitted
- * to the repacketizer state.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_nb_frames(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1);
-
-/** Construct a new packet from data previously submitted to the repacketizer
- * state via opus_repacketizer_cat().
- * This is a convenience routine that returns all the data submitted so far
- * in a single packet.
- * It is equivalent to calling
- * @code
- * opus_repacketizer_out_range(rp, 0, opus_repacketizer_get_nb_frames(rp),
- * data, maxlen)
- * @endcode
- * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to
- * construct the new packet.
- * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to
- * store the output packet.
- * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in
- * the output buffer. In order to guarantee
- * success, this should be at least
- * <code>1277*opus_repacketizer_get_nb_frames(rp)</code>.
- * However,
- * <code>1*opus_repacketizer_get_nb_frames(rp)</code>
- * plus the size of all packet data
- * submitted to the repacketizer since the
- * last call to opus_repacketizer_init() or
- * opus_repacketizer_create() is also
- * sufficient, and possibly much smaller.
- * @returns The total size of the output packet on success, or an error code
- * on failure.
- * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the
- * complete output packet.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out(OpusRepacketizer *rp, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1);
-
-/** Pads a given Opus packet to a larger size (possibly changing the TOC sequence).
- * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
- * packet to pad.
- * @param len <tt>opus_int32</tt>: The size of the packet.
- * This must be at least 1.
- * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding.
- * This must be at least as large as len.
- * @returns an error code
- * @retval #OPUS_OK \a on success.
- * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len.
- * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
- */
-OPUS_EXPORT int opus_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len);
-
-/** Remove all padding from a given Opus packet and rewrite the TOC sequence to
- * minimize space usage.
- * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
- * packet to strip.
- * @param len <tt>opus_int32</tt>: The size of the packet.
- * This must be at least 1.
- * @returns The new size of the output packet on success, or an error code
- * on failure.
- * @retval #OPUS_BAD_ARG \a len was less than 1.
- * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_packet_unpad(unsigned char *data, opus_int32 len);
-
-/** Pads a given Opus multi-stream packet to a larger size (possibly changing the TOC sequence).
- * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
- * packet to pad.
- * @param len <tt>opus_int32</tt>: The size of the packet.
- * This must be at least 1.
- * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding.
- * This must be at least 1.
- * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet.
- * This must be at least as large as len.
- * @returns an error code
- * @retval #OPUS_OK \a on success.
- * @retval #OPUS_BAD_ARG \a len was less than 1.
- * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
- */
-OPUS_EXPORT int opus_multistream_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len, int nb_streams);
-
-/** Remove all padding from a given Opus multi-stream packet and rewrite the TOC sequence to
- * minimize space usage.
- * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
- * packet to strip.
- * @param len <tt>opus_int32</tt>: The size of the packet.
- * This must be at least 1.
- * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet.
- * This must be at least 1.
- * @returns The new size of the output packet on success, or an error code
- * on failure.
- * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len.
- * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_packet_unpad(unsigned char *data, opus_int32 len, int nb_streams);
-
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* OPUS_H */
diff --git a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_defines.h b/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_defines.h
deleted file mode 100644
index 315412d..0000000
--- a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_defines.h
+++ /dev/null
@@ -1,753 +0,0 @@
-/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited
- Written by Jean-Marc Valin and Koen Vos */
-/*
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/**
- * @file opus_defines.h
- * @brief Opus reference implementation constants
- */
-
-#ifndef OPUS_DEFINES_H
-#define OPUS_DEFINES_H
-
-#include "opus_types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** @defgroup opus_errorcodes Error codes
- * @{
- */
-/** No error @hideinitializer*/
-#define OPUS_OK 0
-/** One or more invalid/out of range arguments @hideinitializer*/
-#define OPUS_BAD_ARG -1
-/** Not enough bytes allocated in the buffer @hideinitializer*/
-#define OPUS_BUFFER_TOO_SMALL -2
-/** An internal error was detected @hideinitializer*/
-#define OPUS_INTERNAL_ERROR -3
-/** The compressed data passed is corrupted @hideinitializer*/
-#define OPUS_INVALID_PACKET -4
-/** Invalid/unsupported request number @hideinitializer*/
-#define OPUS_UNIMPLEMENTED -5
-/** An encoder or decoder structure is invalid or already freed @hideinitializer*/
-#define OPUS_INVALID_STATE -6
-/** Memory allocation has failed @hideinitializer*/
-#define OPUS_ALLOC_FAIL -7
-/**@}*/
-
-/** @cond OPUS_INTERNAL_DOC */
-/**Export control for opus functions */
-
-#ifndef OPUS_EXPORT
-# if defined(WIN32)
-# if defined(OPUS_BUILD) && defined(DLL_EXPORT)
-# define OPUS_EXPORT __declspec(dllexport)
-# else
-# define OPUS_EXPORT
-# endif
-# elif defined(__GNUC__) && defined(OPUS_BUILD)
-# define OPUS_EXPORT __attribute__ ((visibility ("default")))
-# else
-# define OPUS_EXPORT
-# endif
-#endif
-
-# if !defined(OPUS_GNUC_PREREQ)
-# if defined(__GNUC__)&&defined(__GNUC_MINOR__)
-# define OPUS_GNUC_PREREQ(_maj,_min) \
- ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min))
-# else
-# define OPUS_GNUC_PREREQ(_maj,_min) 0
-# endif
-# endif
-
-#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
-# if OPUS_GNUC_PREREQ(3,0)
-# define OPUS_RESTRICT __restrict__
-# elif (defined(_MSC_VER) && _MSC_VER >= 1400)
-# define OPUS_RESTRICT __restrict
-# else
-# define OPUS_RESTRICT
-# endif
-#else
-# define OPUS_RESTRICT restrict
-#endif
-
-#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
-# if OPUS_GNUC_PREREQ(2,7)
-# define OPUS_INLINE __inline__
-# elif (defined(_MSC_VER))
-# define OPUS_INLINE __inline
-# else
-# define OPUS_INLINE
-# endif
-#else
-# define OPUS_INLINE inline
-#endif
-
-/**Warning attributes for opus functions
- * NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out
- * some paranoid null checks. */
-#if defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
-# define OPUS_WARN_UNUSED_RESULT __attribute__ ((__warn_unused_result__))
-#else
-# define OPUS_WARN_UNUSED_RESULT
-#endif
-#if !defined(OPUS_BUILD) && defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
-# define OPUS_ARG_NONNULL(_x) __attribute__ ((__nonnull__(_x)))
-#else
-# define OPUS_ARG_NONNULL(_x)
-#endif
-
-/** These are the actual Encoder CTL ID numbers.
- * They should not be used directly by applications.
- * In general, SETs should be even and GETs should be odd.*/
-#define OPUS_SET_APPLICATION_REQUEST 4000
-#define OPUS_GET_APPLICATION_REQUEST 4001
-#define OPUS_SET_BITRATE_REQUEST 4002
-#define OPUS_GET_BITRATE_REQUEST 4003
-#define OPUS_SET_MAX_BANDWIDTH_REQUEST 4004
-#define OPUS_GET_MAX_BANDWIDTH_REQUEST 4005
-#define OPUS_SET_VBR_REQUEST 4006
-#define OPUS_GET_VBR_REQUEST 4007
-#define OPUS_SET_BANDWIDTH_REQUEST 4008
-#define OPUS_GET_BANDWIDTH_REQUEST 4009
-#define OPUS_SET_COMPLEXITY_REQUEST 4010
-#define OPUS_GET_COMPLEXITY_REQUEST 4011
-#define OPUS_SET_INBAND_FEC_REQUEST 4012
-#define OPUS_GET_INBAND_FEC_REQUEST 4013
-#define OPUS_SET_PACKET_LOSS_PERC_REQUEST 4014
-#define OPUS_GET_PACKET_LOSS_PERC_REQUEST 4015
-#define OPUS_SET_DTX_REQUEST 4016
-#define OPUS_GET_DTX_REQUEST 4017
-#define OPUS_SET_VBR_CONSTRAINT_REQUEST 4020
-#define OPUS_GET_VBR_CONSTRAINT_REQUEST 4021
-#define OPUS_SET_FORCE_CHANNELS_REQUEST 4022
-#define OPUS_GET_FORCE_CHANNELS_REQUEST 4023
-#define OPUS_SET_SIGNAL_REQUEST 4024
-#define OPUS_GET_SIGNAL_REQUEST 4025
-#define OPUS_GET_LOOKAHEAD_REQUEST 4027
-/* #define OPUS_RESET_STATE 4028 */
-#define OPUS_GET_SAMPLE_RATE_REQUEST 4029
-#define OPUS_GET_FINAL_RANGE_REQUEST 4031
-#define OPUS_GET_PITCH_REQUEST 4033
-#define OPUS_SET_GAIN_REQUEST 4034
-#define OPUS_GET_GAIN_REQUEST 4045 /* Should have been 4035 */
-#define OPUS_SET_LSB_DEPTH_REQUEST 4036
-#define OPUS_GET_LSB_DEPTH_REQUEST 4037
-#define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039
-#define OPUS_SET_EXPERT_FRAME_DURATION_REQUEST 4040
-#define OPUS_GET_EXPERT_FRAME_DURATION_REQUEST 4041
-#define OPUS_SET_PREDICTION_DISABLED_REQUEST 4042
-#define OPUS_GET_PREDICTION_DISABLED_REQUEST 4043
-
-/* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */
-
-/* Macros to trigger compilation errors when the wrong types are provided to a CTL */
-#define __opus_check_int(x) (((void)((x) == (opus_int32)0)), (opus_int32)(x))
-#define __opus_check_int_ptr(ptr) ((ptr) + ((ptr) - (opus_int32*)(ptr)))
-#define __opus_check_uint_ptr(ptr) ((ptr) + ((ptr) - (opus_uint32*)(ptr)))
-#define __opus_check_val16_ptr(ptr) ((ptr) + ((ptr) - (opus_val16*)(ptr)))
-/** @endcond */
-
-/** @defgroup opus_ctlvalues Pre-defined values for CTL interface
- * @see opus_genericctls, opus_encoderctls
- * @{
- */
-/* Values for the various encoder CTLs */
-#define OPUS_AUTO -1000 /**<Auto/default setting @hideinitializer*/
-#define OPUS_BITRATE_MAX -1 /**<Maximum bitrate @hideinitializer*/
-
-/** Best for most VoIP/videoconference applications where listening quality and intelligibility matter most
- * @hideinitializer */
-#define OPUS_APPLICATION_VOIP 2048
-/** Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input
- * @hideinitializer */
-#define OPUS_APPLICATION_AUDIO 2049
-/** Only use when lowest-achievable latency is what matters most. Voice-optimized modes cannot be used.
- * @hideinitializer */
-#define OPUS_APPLICATION_RESTRICTED_LOWDELAY 2051
-
-#define OPUS_SIGNAL_VOICE 3001 /**< Signal being encoded is voice */
-#define OPUS_SIGNAL_MUSIC 3002 /**< Signal being encoded is music */
-#define OPUS_BANDWIDTH_NARROWBAND 1101 /**< 4 kHz bandpass @hideinitializer*/
-#define OPUS_BANDWIDTH_MEDIUMBAND 1102 /**< 6 kHz bandpass @hideinitializer*/
-#define OPUS_BANDWIDTH_WIDEBAND 1103 /**< 8 kHz bandpass @hideinitializer*/
-#define OPUS_BANDWIDTH_SUPERWIDEBAND 1104 /**<12 kHz bandpass @hideinitializer*/
-#define OPUS_BANDWIDTH_FULLBAND 1105 /**<20 kHz bandpass @hideinitializer*/
-
-#define OPUS_FRAMESIZE_ARG 5000 /**< Select frame size from the argument (default) */
-#define OPUS_FRAMESIZE_2_5_MS 5001 /**< Use 2.5 ms frames */
-#define OPUS_FRAMESIZE_5_MS 5002 /**< Use 5 ms frames */
-#define OPUS_FRAMESIZE_10_MS 5003 /**< Use 10 ms frames */
-#define OPUS_FRAMESIZE_20_MS 5004 /**< Use 20 ms frames */
-#define OPUS_FRAMESIZE_40_MS 5005 /**< Use 40 ms frames */
-#define OPUS_FRAMESIZE_60_MS 5006 /**< Use 60 ms frames */
-
-/**@}*/
-
-
-/** @defgroup opus_encoderctls Encoder related CTLs
- *
- * These are convenience macros for use with the \c opus_encode_ctl
- * interface. They are used to generate the appropriate series of
- * arguments for that call, passing the correct type, size and so
- * on as expected for each particular request.
- *
- * Some usage examples:
- *
- * @code
- * int ret;
- * ret = opus_encoder_ctl(enc_ctx, OPUS_SET_BANDWIDTH(OPUS_AUTO));
- * if (ret != OPUS_OK) return ret;
- *
- * opus_int32 rate;
- * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&rate));
- *
- * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
- * @endcode
- *
- * @see opus_genericctls, opus_encoder
- * @{
- */
-
-/** Configures the encoder's computational complexity.
- * The supported range is 0-10 inclusive with 10 representing the highest complexity.
- * @see OPUS_GET_COMPLEXITY
- * @param[in] x <tt>opus_int32</tt>: Allowed values: 0-10, inclusive.
- *
- * @hideinitializer */
-#define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x)
-/** Gets the encoder's complexity configuration.
- * @see OPUS_SET_COMPLEXITY
- * @param[out] x <tt>opus_int32 *</tt>: Returns a value in the range 0-10,
- * inclusive.
- * @hideinitializer */
-#define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x)
-
-/** Configures the bitrate in the encoder.
- * Rates from 500 to 512000 bits per second are meaningful, as well as the
- * special values #OPUS_AUTO and #OPUS_BITRATE_MAX.
- * The value #OPUS_BITRATE_MAX can be used to cause the codec to use as much
- * rate as it can, which is useful for controlling the rate by adjusting the
- * output buffer size.
- * @see OPUS_GET_BITRATE
- * @param[in] x <tt>opus_int32</tt>: Bitrate in bits per second. The default
- * is determined based on the number of
- * channels and the input sampling rate.
- * @hideinitializer */
-#define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x)
-/** Gets the encoder's bitrate configuration.
- * @see OPUS_SET_BITRATE
- * @param[out] x <tt>opus_int32 *</tt>: Returns the bitrate in bits per second.
- * The default is determined based on the
- * number of channels and the input
- * sampling rate.
- * @hideinitializer */
-#define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x)
-
-/** Enables or disables variable bitrate (VBR) in the encoder.
- * The configured bitrate may not be met exactly because frames must
- * be an integer number of bytes in length.
- * @see OPUS_GET_VBR
- * @see OPUS_SET_VBR_CONSTRAINT
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>0</dt><dd>Hard CBR. For LPC/hybrid modes at very low bit-rate, this can
- * cause noticeable quality degradation.</dd>
- * <dt>1</dt><dd>VBR (default). The exact type of VBR is controlled by
- * #OPUS_SET_VBR_CONSTRAINT.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x)
-/** Determine if variable bitrate (VBR) is enabled in the encoder.
- * @see OPUS_SET_VBR
- * @see OPUS_GET_VBR_CONSTRAINT
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>0</dt><dd>Hard CBR.</dd>
- * <dt>1</dt><dd>VBR (default). The exact type of VBR may be retrieved via
- * #OPUS_GET_VBR_CONSTRAINT.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x)
-
-/** Enables or disables constrained VBR in the encoder.
- * This setting is ignored when the encoder is in CBR mode.
- * @warning Only the MDCT mode of Opus currently heeds the constraint.
- * Speech mode ignores it completely, hybrid mode may fail to obey it
- * if the LPC layer uses more bitrate than the constraint would have
- * permitted.
- * @see OPUS_GET_VBR_CONSTRAINT
- * @see OPUS_SET_VBR
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>0</dt><dd>Unconstrained VBR.</dd>
- * <dt>1</dt><dd>Constrained VBR (default). This creates a maximum of one
- * frame of buffering delay assuming a transport with a
- * serialization speed of the nominal bitrate.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_VBR_CONSTRAINT(x) OPUS_SET_VBR_CONSTRAINT_REQUEST, __opus_check_int(x)
-/** Determine if constrained VBR is enabled in the encoder.
- * @see OPUS_SET_VBR_CONSTRAINT
- * @see OPUS_GET_VBR
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>0</dt><dd>Unconstrained VBR.</dd>
- * <dt>1</dt><dd>Constrained VBR (default).</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_VBR_CONSTRAINT(x) OPUS_GET_VBR_CONSTRAINT_REQUEST, __opus_check_int_ptr(x)
-
-/** Configures mono/stereo forcing in the encoder.
- * This can force the encoder to produce packets encoded as either mono or
- * stereo, regardless of the format of the input audio. This is useful when
- * the caller knows that the input signal is currently a mono source embedded
- * in a stereo stream.
- * @see OPUS_GET_FORCE_CHANNELS
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
- * <dt>1</dt> <dd>Forced mono</dd>
- * <dt>2</dt> <dd>Forced stereo</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x)
-/** Gets the encoder's forced channel configuration.
- * @see OPUS_SET_FORCE_CHANNELS
- * @param[out] x <tt>opus_int32 *</tt>:
- * <dl>
- * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
- * <dt>1</dt> <dd>Forced mono</dd>
- * <dt>2</dt> <dd>Forced stereo</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x)
-
-/** Configures the maximum bandpass that the encoder will select automatically.
- * Applications should normally use this instead of #OPUS_SET_BANDWIDTH
- * (leaving that set to the default, #OPUS_AUTO). This allows the
- * application to set an upper bound based on the type of input it is
- * providing, but still gives the encoder the freedom to reduce the bandpass
- * when the bitrate becomes too low, for better overall quality.
- * @see OPUS_GET_MAX_BANDWIDTH
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
- * <dt>OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
- * <dt>OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
- * <dt>OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
- * <dt>OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x)
-
-/** Gets the encoder's configured maximum allowed bandpass.
- * @see OPUS_SET_MAX_BANDWIDTH
- * @param[out] x <tt>opus_int32 *</tt>: Allowed values:
- * <dl>
- * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband (default)</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
-
-/** Sets the encoder's bandpass to a specific value.
- * This prevents the encoder from automatically selecting the bandpass based
- * on the available bitrate. If an application knows the bandpass of the input
- * audio it is providing, it should normally use #OPUS_SET_MAX_BANDWIDTH
- * instead, which still gives the encoder the freedom to reduce the bandpass
- * when the bitrate becomes too low, for better overall quality.
- * @see OPUS_GET_BANDWIDTH
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
- * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_BANDWIDTH(x) OPUS_SET_BANDWIDTH_REQUEST, __opus_check_int(x)
-
-/** Configures the type of signal being encoded.
- * This is a hint which helps the encoder's mode selection.
- * @see OPUS_GET_SIGNAL
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
- * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
- * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured signal type.
- * @see OPUS_SET_SIGNAL
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
- * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
- * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_SIGNAL(x) OPUS_GET_SIGNAL_REQUEST, __opus_check_int_ptr(x)
-
-
-/** Configures the encoder's intended application.
- * The initial value is a mandatory argument to the encoder_create function.
- * @see OPUS_GET_APPLICATION
- * @param[in] x <tt>opus_int32</tt>: Returns one of the following values:
- * <dl>
- * <dt>#OPUS_APPLICATION_VOIP</dt>
- * <dd>Process signal for improved speech intelligibility.</dd>
- * <dt>#OPUS_APPLICATION_AUDIO</dt>
- * <dd>Favor faithfulness to the original input.</dd>
- * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
- * <dd>Configure the minimum possible coding delay by disabling certain modes
- * of operation.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured application.
- * @see OPUS_SET_APPLICATION
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>#OPUS_APPLICATION_VOIP</dt>
- * <dd>Process signal for improved speech intelligibility.</dd>
- * <dt>#OPUS_APPLICATION_AUDIO</dt>
- * <dd>Favor faithfulness to the original input.</dd>
- * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
- * <dd>Configure the minimum possible coding delay by disabling certain modes
- * of operation.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_APPLICATION(x) OPUS_GET_APPLICATION_REQUEST, __opus_check_int_ptr(x)
-
-/** Gets the total samples of delay added by the entire codec.
- * This can be queried by the encoder and then the provided number of samples can be
- * skipped on from the start of the decoder's output to provide time aligned input
- * and output. From the perspective of a decoding application the real data begins this many
- * samples late.
- *
- * The decoder contribution to this delay is identical for all decoders, but the
- * encoder portion of the delay may vary from implementation to implementation,
- * version to version, or even depend on the encoder's initial configuration.
- * Applications needing delay compensation should call this CTL rather than
- * hard-coding a value.
- * @param[out] x <tt>opus_int32 *</tt>: Number of lookahead samples
- * @hideinitializer */
-#define OPUS_GET_LOOKAHEAD(x) OPUS_GET_LOOKAHEAD_REQUEST, __opus_check_int_ptr(x)
-
-/** Configures the encoder's use of inband forward error correction (FEC).
- * @note This is only applicable to the LPC layer
- * @see OPUS_GET_INBAND_FEC
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>0</dt><dd>Disable inband FEC (default).</dd>
- * <dt>1</dt><dd>Enable inband FEC.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x)
-/** Gets encoder's configured use of inband forward error correction.
- * @see OPUS_SET_INBAND_FEC
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>0</dt><dd>Inband FEC disabled (default).</dd>
- * <dt>1</dt><dd>Inband FEC enabled.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_INBAND_FEC(x) OPUS_GET_INBAND_FEC_REQUEST, __opus_check_int_ptr(x)
-
-/** Configures the encoder's expected packet loss percentage.
- * Higher values trigger progressively more loss resistant behavior in the encoder
- * at the expense of quality at a given bitrate in the absence of packet loss, but
- * greater quality under loss.
- * @see OPUS_GET_PACKET_LOSS_PERC
- * @param[in] x <tt>opus_int32</tt>: Loss percentage in the range 0-100, inclusive (default: 0).
- * @hideinitializer */
-#define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured packet loss percentage.
- * @see OPUS_SET_PACKET_LOSS_PERC
- * @param[out] x <tt>opus_int32 *</tt>: Returns the configured loss percentage
- * in the range 0-100, inclusive (default: 0).
- * @hideinitializer */
-#define OPUS_GET_PACKET_LOSS_PERC(x) OPUS_GET_PACKET_LOSS_PERC_REQUEST, __opus_check_int_ptr(x)
-
-/** Configures the encoder's use of discontinuous transmission (DTX).
- * @note This is only applicable to the LPC layer
- * @see OPUS_GET_DTX
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>0</dt><dd>Disable DTX (default).</dd>
- * <dt>1</dt><dd>Enabled DTX.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x)
-/** Gets encoder's configured use of discontinuous transmission.
- * @see OPUS_SET_DTX
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>0</dt><dd>DTX disabled (default).</dd>
- * <dt>1</dt><dd>DTX enabled.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_DTX(x) OPUS_GET_DTX_REQUEST, __opus_check_int_ptr(x)
-/** Configures the depth of signal being encoded.
- *
- * This is a hint which helps the encoder identify silence and near-silence.
- * It represents the number of significant bits of linear intensity below
- * which the signal contains ignorable quantization or other noise.
- *
- * For example, OPUS_SET_LSB_DEPTH(14) would be an appropriate setting
- * for G.711 u-law input. OPUS_SET_LSB_DEPTH(16) would be appropriate
- * for 16-bit linear pcm input with opus_encode_float().
- *
- * When using opus_encode() instead of opus_encode_float(), or when libopus
- * is compiled for fixed-point, the encoder uses the minimum of the value
- * set here and the value 16.
- *
- * @see OPUS_GET_LSB_DEPTH
- * @param[in] x <tt>opus_int32</tt>: Input precision in bits, between 8 and 24
- * (default: 24).
- * @hideinitializer */
-#define OPUS_SET_LSB_DEPTH(x) OPUS_SET_LSB_DEPTH_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured signal depth.
- * @see OPUS_SET_LSB_DEPTH
- * @param[out] x <tt>opus_int32 *</tt>: Input precision in bits, between 8 and
- * 24 (default: 24).
- * @hideinitializer */
-#define OPUS_GET_LSB_DEPTH(x) OPUS_GET_LSB_DEPTH_REQUEST, __opus_check_int_ptr(x)
-
-/** Configures the encoder's use of variable duration frames.
- * When variable duration is enabled, the encoder is free to use a shorter frame
- * size than the one requested in the opus_encode*() call.
- * It is then the user's responsibility
- * to verify how much audio was encoded by checking the ToC byte of the encoded
- * packet. The part of the audio that was not encoded needs to be resent to the
- * encoder for the next call. Do not use this option unless you <b>really</b>
- * know what you are doing.
- * @see OPUS_GET_EXPERT_FRAME_DURATION
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd>
- * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 5 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_VARIABLE</dt><dd>Optimize the frame size dynamically.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_EXPERT_FRAME_DURATION(x) OPUS_SET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured use of variable duration frames.
- * @see OPUS_SET_EXPERT_FRAME_DURATION
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd>
- * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 5 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd>
- * <dt>OPUS_FRAMESIZE_VARIABLE</dt><dd>Optimize the frame size dynamically.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_EXPERT_FRAME_DURATION(x) OPUS_GET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int_ptr(x)
-
-/** If set to 1, disables almost all use of prediction, making frames almost
- * completely independent. This reduces quality.
- * @see OPUS_GET_PREDICTION_DISABLED
- * @param[in] x <tt>opus_int32</tt>: Allowed values:
- * <dl>
- * <dt>0</dt><dd>Enable prediction (default).</dd>
- * <dt>1</dt><dd>Disable prediction.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_SET_PREDICTION_DISABLED(x) OPUS_SET_PREDICTION_DISABLED_REQUEST, __opus_check_int(x)
-/** Gets the encoder's configured prediction status.
- * @see OPUS_SET_PREDICTION_DISABLED
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>0</dt><dd>Prediction enabled (default).</dd>
- * <dt>1</dt><dd>Prediction disabled.</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_PREDICTION_DISABLED(x) OPUS_GET_PREDICTION_DISABLED_REQUEST, __opus_check_int_ptr(x)
-
-/**@}*/
-
-/** @defgroup opus_genericctls Generic CTLs
- *
- * These macros are used with the \c opus_decoder_ctl and
- * \c opus_encoder_ctl calls to generate a particular
- * request.
- *
- * When called on an \c OpusDecoder they apply to that
- * particular decoder instance. When called on an
- * \c OpusEncoder they apply to the corresponding setting
- * on that encoder instance, if present.
- *
- * Some usage examples:
- *
- * @code
- * int ret;
- * opus_int32 pitch;
- * ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch));
- * if (ret == OPUS_OK) return ret;
- *
- * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
- * opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE);
- *
- * opus_int32 enc_bw, dec_bw;
- * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw));
- * opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw));
- * if (enc_bw != dec_bw) {
- * printf("packet bandwidth mismatch!\n");
- * }
- * @endcode
- *
- * @see opus_encoder, opus_decoder_ctl, opus_encoder_ctl, opus_decoderctls, opus_encoderctls
- * @{
- */
-
-/** Resets the codec state to be equivalent to a freshly initialized state.
- * This should be called when switching streams in order to prevent
- * the back to back decoding from giving different results from
- * one at a time decoding.
- * @hideinitializer */
-#define OPUS_RESET_STATE 4028
-
-/** Gets the final state of the codec's entropy coder.
- * This is used for testing purposes,
- * The encoder and decoder state should be identical after coding a payload
- * (assuming no data corruption or software bugs)
- *
- * @param[out] x <tt>opus_uint32 *</tt>: Entropy coder state
- *
- * @hideinitializer */
-#define OPUS_GET_FINAL_RANGE(x) OPUS_GET_FINAL_RANGE_REQUEST, __opus_check_uint_ptr(x)
-
-/** Gets the encoder's configured bandpass or the decoder's last bandpass.
- * @see OPUS_SET_BANDWIDTH
- * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
- * <dl>
- * <dt>#OPUS_AUTO</dt> <dd>(default)</dd>
- * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt> <dd>4 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt> <dd>6 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt> <dd>8 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
- * <dt>#OPUS_BANDWIDTH_FULLBAND</dt> <dd>20 kHz passband</dd>
- * </dl>
- * @hideinitializer */
-#define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
-
-/** Gets the sampling rate the encoder or decoder was initialized with.
- * This simply returns the <code>Fs</code> value passed to opus_encoder_init()
- * or opus_decoder_init().
- * @param[out] x <tt>opus_int32 *</tt>: Sampling rate of encoder or decoder.
- * @hideinitializer
- */
-#define OPUS_GET_SAMPLE_RATE(x) OPUS_GET_SAMPLE_RATE_REQUEST, __opus_check_int_ptr(x)
-
-/**@}*/
-
-/** @defgroup opus_decoderctls Decoder related CTLs
- * @see opus_genericctls, opus_encoderctls, opus_decoder
- * @{
- */
-
-/** Configures decoder gain adjustment.
- * Scales the decoded output by a factor specified in Q8 dB units.
- * This has a maximum range of -32768 to 32767 inclusive, and returns
- * OPUS_BAD_ARG otherwise. The default is zero indicating no adjustment.
- * This setting survives decoder reset.
- *
- * gain = pow(10, x/(20.0*256))
- *
- * @param[in] x <tt>opus_int32</tt>: Amount to scale PCM signal by in Q8 dB units.
- * @hideinitializer */
-#define OPUS_SET_GAIN(x) OPUS_SET_GAIN_REQUEST, __opus_check_int(x)
-/** Gets the decoder's configured gain adjustment. @see OPUS_SET_GAIN
- *
- * @param[out] x <tt>opus_int32 *</tt>: Amount to scale PCM signal by in Q8 dB units.
- * @hideinitializer */
-#define OPUS_GET_GAIN(x) OPUS_GET_GAIN_REQUEST, __opus_check_int_ptr(x)
-
-/** Gets the duration (in samples) of the last packet successfully decoded or concealed.
- * @param[out] x <tt>opus_int32 *</tt>: Number of samples (at current sampling rate).
- * @hideinitializer */
-#define OPUS_GET_LAST_PACKET_DURATION(x) OPUS_GET_LAST_PACKET_DURATION_REQUEST, __opus_check_int_ptr(x)
-
-/** Gets the pitch of the last decoded frame, if available.
- * This can be used for any post-processing algorithm requiring the use of pitch,
- * e.g. time stretching/shortening. If the last frame was not voiced, or if the
- * pitch was not coded in the frame, then zero is returned.
- *
- * This CTL is only implemented for decoder instances.
- *
- * @param[out] x <tt>opus_int32 *</tt>: pitch period at 48 kHz (or 0 if not available)
- *
- * @hideinitializer */
-#define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x)
-
-/**@}*/
-
-/** @defgroup opus_libinfo Opus library information functions
- * @{
- */
-
-/** Converts an opus error code into a human readable string.
- *
- * @param[in] error <tt>int</tt>: Error number
- * @returns Error string
- */
-OPUS_EXPORT const char *opus_strerror(int error);
-
-/** Gets the libopus version string.
- *
- * Applications may look for the substring "-fixed" in the version string to
- * determine whether they have a fixed-point or floating-point build at
- * runtime.
- *
- * @returns Version string
- */
-OPUS_EXPORT const char *opus_get_version_string(void);
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* OPUS_DEFINES_H */
diff --git a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_multistream.h b/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_multistream.h
deleted file mode 100644
index 3622e00..0000000
--- a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_multistream.h
+++ /dev/null
@@ -1,660 +0,0 @@
-/* Copyright (c) 2011 Xiph.Org Foundation
- Written by Jean-Marc Valin */
-/*
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/**
- * @file opus_multistream.h
- * @brief Opus reference implementation multistream API
- */
-
-#ifndef OPUS_MULTISTREAM_H
-#define OPUS_MULTISTREAM_H
-
-#include "opus.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** @cond OPUS_INTERNAL_DOC */
-
-/** Macros to trigger compilation errors when the wrong types are provided to a
- * CTL. */
-/**@{*/
-#define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr)))
-#define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr)))
-/**@}*/
-
-/** These are the actual encoder and decoder CTL ID numbers.
- * They should not be used directly by applications.
- * In general, SETs should be even and GETs should be odd.*/
-/**@{*/
-#define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120
-#define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122
-/**@}*/
-
-/** @endcond */
-
-/** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs
- *
- * These are convenience macros that are specific to the
- * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl()
- * interface.
- * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and
- * @ref opus_decoderctls may be applied to a multistream encoder or decoder as
- * well.
- * In addition, you may retrieve the encoder or decoder state for an specific
- * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or
- * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually.
- */
-/**@{*/
-
-/** Gets the encoder state for an individual stream of a multistream encoder.
- * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you
- * wish to retrieve.
- * This must be non-negative and less than
- * the <code>streams</code> parameter used
- * to initialize the encoder.
- * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given
- * encoder state.
- * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
- * @hideinitializer
- */
-#define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y)
-
-/** Gets the decoder state for an individual stream of a multistream decoder.
- * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you
- * wish to retrieve.
- * This must be non-negative and less than
- * the <code>streams</code> parameter used
- * to initialize the decoder.
- * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given
- * decoder state.
- * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
- * @hideinitializer
- */
-#define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y)
-
-/**@}*/
-
-/** @defgroup opus_multistream Opus Multistream API
- * @{
- *
- * The multistream API allows individual Opus streams to be combined into a
- * single packet, enabling support for up to 255 channels. Unlike an
- * elementary Opus stream, the encoder and decoder must negotiate the channel
- * configuration before the decoder can successfully interpret the data in the
- * packets produced by the encoder. Some basic information, such as packet
- * duration, can be computed without any special negotiation.
- *
- * The format for multistream Opus packets is defined in
- * <a href="https://tools.ietf.org/html/rfc7845">RFC 7845</a>
- * and is based on the self-delimited Opus framing described in Appendix B of
- * <a href="https://tools.ietf.org/html/rfc6716">RFC 6716</a>.
- * Normal Opus packets are just a degenerate case of multistream Opus packets,
- * and can be encoded or decoded with the multistream API by setting
- * <code>streams</code> to <code>1</code> when initializing the encoder or
- * decoder.
- *
- * Multistream Opus streams can contain up to 255 elementary Opus streams.
- * These may be either "uncoupled" or "coupled", indicating that the decoder
- * is configured to decode them to either 1 or 2 channels, respectively.
- * The streams are ordered so that all coupled streams appear at the
- * beginning.
- *
- * A <code>mapping</code> table defines which decoded channel <code>i</code>
- * should be used for each input/output (I/O) channel <code>j</code>. This table is
- * typically provided as an unsigned char array.
- * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>.
- * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is
- * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code>
- * is even, or as the right channel of stream <code>(i/2)</code> if
- * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as
- * mono in stream <code>(i - coupled_streams)</code>, unless it has the special
- * value 255, in which case it is omitted from the encoding entirely (the
- * decoder will reproduce it as silence). Each value <code>i</code> must either
- * be the special value 255 or be less than <code>streams + coupled_streams</code>.
- *
- * The output channels specified by the encoder
- * should use the
- * <a href="https://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-810004.3.9">Vorbis
- * channel ordering</a>. A decoder may wish to apply an additional permutation
- * to the mapping the encoder used to achieve a different output channel
- * order (e.g. for outputing in WAV order).
- *
- * Each multistream packet contains an Opus packet for each stream, and all of
- * the Opus packets in a single multistream packet must have the same
- * duration. Therefore the duration of a multistream packet can be extracted
- * from the TOC sequence of the first stream, which is located at the
- * beginning of the packet, just like an elementary Opus stream:
- *
- * @code
- * int nb_samples;
- * int nb_frames;
- * nb_frames = opus_packet_get_nb_frames(data, len);
- * if (nb_frames < 1)
- * return nb_frames;
- * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames;
- * @endcode
- *
- * The general encoding and decoding process proceeds exactly the same as in
- * the normal @ref opus_encoder and @ref opus_decoder APIs.
- * See their documentation for an overview of how to use the corresponding
- * multistream functions.
- */
-
-/** Opus multistream encoder state.
- * This contains the complete state of a multistream Opus encoder.
- * It is position independent and can be freely copied.
- * @see opus_multistream_encoder_create
- * @see opus_multistream_encoder_init
- */
-typedef struct OpusMSEncoder OpusMSEncoder;
-
-/** Opus multistream decoder state.
- * This contains the complete state of a multistream Opus decoder.
- * It is position independent and can be freely copied.
- * @see opus_multistream_decoder_create
- * @see opus_multistream_decoder_init
- */
-typedef struct OpusMSDecoder OpusMSDecoder;
-
-/**\name Multistream encoder functions */
-/**@{*/
-
-/** Gets the size of an OpusMSEncoder structure.
- * @param streams <tt>int</tt>: The total number of streams to encode from the
- * input.
- * This must be no more than 255.
- * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
- * to encode.
- * This must be no larger than the total
- * number of streams.
- * Additionally, The total number of
- * encoded channels (<code>streams +
- * coupled_streams</code>) must be no
- * more than 255.
- * @returns The size in bytes on success, or a negative error code
- * (see @ref opus_errorcodes) on error.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size(
- int streams,
- int coupled_streams
-);
-
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_surround_encoder_get_size(
- int channels,
- int mapping_family
-);
-
-
-/** Allocates and initializes a multistream encoder state.
- * Call opus_multistream_encoder_destroy() to release
- * this object when finished.
- * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param channels <tt>int</tt>: Number of channels in the input signal.
- * This must be at most 255.
- * It may be greater than the number of
- * coded channels (<code>streams +
- * coupled_streams</code>).
- * @param streams <tt>int</tt>: The total number of streams to encode from the
- * input.
- * This must be no more than the number of channels.
- * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
- * to encode.
- * This must be no larger than the total
- * number of streams.
- * Additionally, The total number of
- * encoded channels (<code>streams +
- * coupled_streams</code>) must be no
- * more than the number of input channels.
- * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
- * encoded channels to input channels, as described in
- * @ref opus_multistream. As an extra constraint, the
- * multistream encoder does not allow encoding coupled
- * streams for which one channel is unused since this
- * is never a good idea.
- * @param application <tt>int</tt>: The target encoder application.
- * This must be one of the following:
- * <dl>
- * <dt>#OPUS_APPLICATION_VOIP</dt>
- * <dd>Process signal for improved speech intelligibility.</dd>
- * <dt>#OPUS_APPLICATION_AUDIO</dt>
- * <dd>Favor faithfulness to the original input.</dd>
- * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
- * <dd>Configure the minimum possible coding delay by disabling certain modes
- * of operation.</dd>
- * </dl>
- * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
- * code (see @ref opus_errorcodes) on
- * failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create(
- opus_int32 Fs,
- int channels,
- int streams,
- int coupled_streams,
- const unsigned char *mapping,
- int application,
- int *error
-) OPUS_ARG_NONNULL(5);
-
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_surround_encoder_create(
- opus_int32 Fs,
- int channels,
- int mapping_family,
- int *streams,
- int *coupled_streams,
- unsigned char *mapping,
- int application,
- int *error
-) OPUS_ARG_NONNULL(5);
-
-/** Initialize a previously allocated multistream encoder state.
- * The memory pointed to by \a st must be at least the size returned by
- * opus_multistream_encoder_get_size().
- * This is intended for applications which use their own allocator instead of
- * malloc.
- * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
- * @see opus_multistream_encoder_create
- * @see opus_multistream_encoder_get_size
- * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
- * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param channels <tt>int</tt>: Number of channels in the input signal.
- * This must be at most 255.
- * It may be greater than the number of
- * coded channels (<code>streams +
- * coupled_streams</code>).
- * @param streams <tt>int</tt>: The total number of streams to encode from the
- * input.
- * This must be no more than the number of channels.
- * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
- * to encode.
- * This must be no larger than the total
- * number of streams.
- * Additionally, The total number of
- * encoded channels (<code>streams +
- * coupled_streams</code>) must be no
- * more than the number of input channels.
- * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
- * encoded channels to input channels, as described in
- * @ref opus_multistream. As an extra constraint, the
- * multistream encoder does not allow encoding coupled
- * streams for which one channel is unused since this
- * is never a good idea.
- * @param application <tt>int</tt>: The target encoder application.
- * This must be one of the following:
- * <dl>
- * <dt>#OPUS_APPLICATION_VOIP</dt>
- * <dd>Process signal for improved speech intelligibility.</dd>
- * <dt>#OPUS_APPLICATION_AUDIO</dt>
- * <dd>Favor faithfulness to the original input.</dd>
- * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
- * <dd>Configure the minimum possible coding delay by disabling certain modes
- * of operation.</dd>
- * </dl>
- * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
- * on failure.
- */
-OPUS_EXPORT int opus_multistream_encoder_init(
- OpusMSEncoder *st,
- opus_int32 Fs,
- int channels,
- int streams,
- int coupled_streams,
- const unsigned char *mapping,
- int application
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
-
-OPUS_EXPORT int opus_multistream_surround_encoder_init(
- OpusMSEncoder *st,
- opus_int32 Fs,
- int channels,
- int mapping_family,
- int *streams,
- int *coupled_streams,
- unsigned char *mapping,
- int application
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
-
-/** Encodes a multistream Opus frame.
- * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
- * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved
- * samples.
- * This must contain
- * <code>frame_size*channels</code>
- * samples.
- * @param frame_size <tt>int</tt>: Number of samples per channel in the input
- * signal.
- * This must be an Opus frame size for the
- * encoder's sampling rate.
- * For example, at 48 kHz the permitted values
- * are 120, 240, 480, 960, 1920, and 2880.
- * Passing in a duration of less than 10 ms
- * (480 samples at 48 kHz) will prevent the
- * encoder from using the LPC or hybrid modes.
- * @param[out] data <tt>unsigned char*</tt>: Output payload.
- * This must contain storage for at
- * least \a max_data_bytes.
- * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
- * memory for the output
- * payload. This may be
- * used to impose an upper limit on
- * the instant bitrate, but should
- * not be used as the only bitrate
- * control. Use #OPUS_SET_BITRATE to
- * control the bitrate.
- * @returns The length of the encoded packet (in bytes) on success or a
- * negative error code (see @ref opus_errorcodes) on failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode(
- OpusMSEncoder *st,
- const opus_int16 *pcm,
- int frame_size,
- unsigned char *data,
- opus_int32 max_data_bytes
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
-
-/** Encodes a multistream Opus frame from floating point input.
- * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
- * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved
- * samples with a normal range of
- * +/-1.0.
- * Samples with a range beyond +/-1.0
- * are supported but will be clipped by
- * decoders using the integer API and
- * should only be used if it is known
- * that the far end supports extended
- * dynamic range.
- * This must contain
- * <code>frame_size*channels</code>
- * samples.
- * @param frame_size <tt>int</tt>: Number of samples per channel in the input
- * signal.
- * This must be an Opus frame size for the
- * encoder's sampling rate.
- * For example, at 48 kHz the permitted values
- * are 120, 240, 480, 960, 1920, and 2880.
- * Passing in a duration of less than 10 ms
- * (480 samples at 48 kHz) will prevent the
- * encoder from using the LPC or hybrid modes.
- * @param[out] data <tt>unsigned char*</tt>: Output payload.
- * This must contain storage for at
- * least \a max_data_bytes.
- * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
- * memory for the output
- * payload. This may be
- * used to impose an upper limit on
- * the instant bitrate, but should
- * not be used as the only bitrate
- * control. Use #OPUS_SET_BITRATE to
- * control the bitrate.
- * @returns The length of the encoded packet (in bytes) on success or a
- * negative error code (see @ref opus_errorcodes) on failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float(
- OpusMSEncoder *st,
- const float *pcm,
- int frame_size,
- unsigned char *data,
- opus_int32 max_data_bytes
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
-
-/** Frees an <code>OpusMSEncoder</code> allocated by
- * opus_multistream_encoder_create().
- * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed.
- */
-OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st);
-
-/** Perform a CTL function on a multistream Opus encoder.
- *
- * Generally the request and subsequent arguments are generated by a
- * convenience macro.
- * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
- * @param request This and all remaining parameters should be replaced by one
- * of the convenience macros in @ref opus_genericctls,
- * @ref opus_encoderctls, or @ref opus_multistream_ctls.
- * @see opus_genericctls
- * @see opus_encoderctls
- * @see opus_multistream_ctls
- */
-OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
-
-/**@}*/
-
-/**\name Multistream decoder functions */
-/**@{*/
-
-/** Gets the size of an <code>OpusMSDecoder</code> structure.
- * @param streams <tt>int</tt>: The total number of streams coded in the
- * input.
- * This must be no more than 255.
- * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled
- * (2 channel) streams.
- * This must be no larger than the total
- * number of streams.
- * Additionally, The total number of
- * coded channels (<code>streams +
- * coupled_streams</code>) must be no
- * more than 255.
- * @returns The size in bytes on success, or a negative error code
- * (see @ref opus_errorcodes) on error.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size(
- int streams,
- int coupled_streams
-);
-
-/** Allocates and initializes a multistream decoder state.
- * Call opus_multistream_decoder_destroy() to release
- * this object when finished.
- * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param channels <tt>int</tt>: Number of channels to output.
- * This must be at most 255.
- * It may be different from the number of coded
- * channels (<code>streams +
- * coupled_streams</code>).
- * @param streams <tt>int</tt>: The total number of streams coded in the
- * input.
- * This must be no more than 255.
- * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
- * (2 channel) streams.
- * This must be no larger than the total
- * number of streams.
- * Additionally, The total number of
- * coded channels (<code>streams +
- * coupled_streams</code>) must be no
- * more than 255.
- * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
- * coded channels to output channels, as described in
- * @ref opus_multistream.
- * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
- * code (see @ref opus_errorcodes) on
- * failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create(
- opus_int32 Fs,
- int channels,
- int streams,
- int coupled_streams,
- const unsigned char *mapping,
- int *error
-) OPUS_ARG_NONNULL(5);
-
-/** Intialize a previously allocated decoder state object.
- * The memory pointed to by \a st must be at least the size returned by
- * opus_multistream_encoder_get_size().
- * This is intended for applications which use their own allocator instead of
- * malloc.
- * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
- * @see opus_multistream_decoder_create
- * @see opus_multistream_deocder_get_size
- * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
- * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
- * This must be one of 8000, 12000, 16000,
- * 24000, or 48000.
- * @param channels <tt>int</tt>: Number of channels to output.
- * This must be at most 255.
- * It may be different from the number of coded
- * channels (<code>streams +
- * coupled_streams</code>).
- * @param streams <tt>int</tt>: The total number of streams coded in the
- * input.
- * This must be no more than 255.
- * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
- * (2 channel) streams.
- * This must be no larger than the total
- * number of streams.
- * Additionally, The total number of
- * coded channels (<code>streams +
- * coupled_streams</code>) must be no
- * more than 255.
- * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
- * coded channels to output channels, as described in
- * @ref opus_multistream.
- * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
- * on failure.
- */
-OPUS_EXPORT int opus_multistream_decoder_init(
- OpusMSDecoder *st,
- opus_int32 Fs,
- int channels,
- int streams,
- int coupled_streams,
- const unsigned char *mapping
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
-
-/** Decode a multistream Opus packet.
- * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
- * @param[in] data <tt>const unsigned char*</tt>: Input payload.
- * Use a <code>NULL</code>
- * pointer to indicate packet
- * loss.
- * @param len <tt>opus_int32</tt>: Number of bytes in payload.
- * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
- * samples.
- * This must contain room for
- * <code>frame_size*channels</code>
- * samples.
- * @param frame_size <tt>int</tt>: The number of samples per channel of
- * available space in \a pcm.
- * If this is less than the maximum packet duration
- * (120 ms; 5760 for 48kHz), this function will not be capable
- * of decoding some packets. In the case of PLC (data==NULL)
- * or FEC (decode_fec=1), then frame_size needs to be exactly
- * the duration of audio that is missing, otherwise the
- * decoder will not be in the optimal state to decode the
- * next incoming packet. For the PLC and FEC cases, frame_size
- * <b>must</b> be a multiple of 2.5 ms.
- * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
- * forward error correction data be decoded.
- * If no such data is available, the frame is
- * decoded as if it were lost.
- * @returns Number of samples decoded on success or a negative error code
- * (see @ref opus_errorcodes) on failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode(
- OpusMSDecoder *st,
- const unsigned char *data,
- opus_int32 len,
- opus_int16 *pcm,
- int frame_size,
- int decode_fec
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Decode a multistream Opus packet with floating point output.
- * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
- * @param[in] data <tt>const unsigned char*</tt>: Input payload.
- * Use a <code>NULL</code>
- * pointer to indicate packet
- * loss.
- * @param len <tt>opus_int32</tt>: Number of bytes in payload.
- * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
- * samples.
- * This must contain room for
- * <code>frame_size*channels</code>
- * samples.
- * @param frame_size <tt>int</tt>: The number of samples per channel of
- * available space in \a pcm.
- * If this is less than the maximum packet duration
- * (120 ms; 5760 for 48kHz), this function will not be capable
- * of decoding some packets. In the case of PLC (data==NULL)
- * or FEC (decode_fec=1), then frame_size needs to be exactly
- * the duration of audio that is missing, otherwise the
- * decoder will not be in the optimal state to decode the
- * next incoming packet. For the PLC and FEC cases, frame_size
- * <b>must</b> be a multiple of 2.5 ms.
- * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
- * forward error correction data be decoded.
- * If no such data is available, the frame is
- * decoded as if it were lost.
- * @returns Number of samples decoded on success or a negative error code
- * (see @ref opus_errorcodes) on failure.
- */
-OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float(
- OpusMSDecoder *st,
- const unsigned char *data,
- opus_int32 len,
- float *pcm,
- int frame_size,
- int decode_fec
-) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
-
-/** Perform a CTL function on a multistream Opus decoder.
- *
- * Generally the request and subsequent arguments are generated by a
- * convenience macro.
- * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
- * @param request This and all remaining parameters should be replaced by one
- * of the convenience macros in @ref opus_genericctls,
- * @ref opus_decoderctls, or @ref opus_multistream_ctls.
- * @see opus_genericctls
- * @see opus_decoderctls
- * @see opus_multistream_ctls
- */
-OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
-
-/** Frees an <code>OpusMSDecoder</code> allocated by
- * opus_multistream_decoder_create().
- * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed.
- */
-OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st);
-
-/**@}*/
-
-/**@}*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* OPUS_MULTISTREAM_H */
diff --git a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_types.h b/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_types.h
deleted file mode 100644
index b28e03a..0000000
--- a/Channel/IOS/qkbt2game/Plugins/Opus/include/opus/opus_types.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* (C) COPYRIGHT 1994-2002 Xiph.Org Foundation */
-/* Modified by Jean-Marc Valin */
-/*
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
- OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-/* opus_types.h based on ogg_types.h from libogg */
-
-/**
- @file opus_types.h
- @brief Opus reference implementation types
-*/
-#ifndef OPUS_TYPES_H
-#define OPUS_TYPES_H
-
-/* Use the real stdint.h if it's there (taken from Paul Hsieh's pstdint.h) */
-#if (defined(__STDC__) && __STDC__ && __STDC_VERSION__ >= 199901L) || (defined(__GNUC__) && (defined(_STDINT_H) || defined(_STDINT_H_)) || defined (HAVE_STDINT_H))
-#include <stdint.h>
-
- typedef int16_t opus_int16;
- typedef uint16_t opus_uint16;
- typedef int32_t opus_int32;
- typedef uint32_t opus_uint32;
-#elif defined(_WIN32)
-
-# if defined(__CYGWIN__)
-# include <_G_config.h>
- typedef _G_int32_t opus_int32;
- typedef _G_uint32_t opus_uint32;
- typedef _G_int16 opus_int16;
- typedef _G_uint16 opus_uint16;
-# elif defined(__MINGW32__)
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
- typedef int opus_int32;
- typedef unsigned int opus_uint32;
-# elif defined(__MWERKS__)
- typedef int opus_int32;
- typedef unsigned int opus_uint32;
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
-# else
- /* MSVC/Borland */
- typedef __int32 opus_int32;
- typedef unsigned __int32 opus_uint32;
- typedef __int16 opus_int16;
- typedef unsigned __int16 opus_uint16;
-# endif
-
-#elif defined(__MACOS__)
-
-# include <sys/types.h>
- typedef SInt16 opus_int16;
- typedef UInt16 opus_uint16;
- typedef SInt32 opus_int32;
- typedef UInt32 opus_uint32;
-
-#elif (defined(__APPLE__) && defined(__MACH__)) /* MacOS X Framework build */
-
-# include <sys/types.h>
- typedef int16_t opus_int16;
- typedef u_int16_t opus_uint16;
- typedef int32_t opus_int32;
- typedef u_int32_t opus_uint32;
-
-#elif defined(__BEOS__)
-
- /* Be */
-# include <inttypes.h>
- typedef int16 opus_int16;
- typedef u_int16 opus_uint16;
- typedef int32_t opus_int32;
- typedef u_int32_t opus_uint32;
-
-#elif defined (__EMX__)
-
- /* OS/2 GCC */
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
- typedef int opus_int32;
- typedef unsigned int opus_uint32;
-
-#elif defined (DJGPP)
-
- /* DJGPP */
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
- typedef int opus_int32;
- typedef unsigned int opus_uint32;
-
-#elif defined(R5900)
-
- /* PS2 EE */
- typedef int opus_int32;
- typedef unsigned opus_uint32;
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
-
-#elif defined(__SYMBIAN32__)
-
- /* Symbian GCC */
- typedef signed short opus_int16;
- typedef unsigned short opus_uint16;
- typedef signed int opus_int32;
- typedef unsigned int opus_uint32;
-
-#elif defined(CONFIG_TI_C54X) || defined (CONFIG_TI_C55X)
-
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
- typedef long opus_int32;
- typedef unsigned long opus_uint32;
-
-#elif defined(CONFIG_TI_C6X)
-
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
- typedef int opus_int32;
- typedef unsigned int opus_uint32;
-
-#else
-
- /* Give up, take a reasonable guess */
- typedef short opus_int16;
- typedef unsigned short opus_uint16;
- typedef int opus_int32;
- typedef unsigned int opus_uint32;
-
-#endif
-
-#define opus_int int /* used for counters etc; at least 16 bits */
-#define opus_int64 long long
-#define opus_int8 signed char
-
-#define opus_uint unsigned int /* used for counters etc; at least 16 bits */
-#define opus_uint64 unsigned long long
-#define opus_uint8 unsigned char
-
-#endif /* OPUS_TYPES_H */
diff --git a/Channel/IOS/qkbt2game/Plugins/Opus/lib/libopus.a b/Channel/IOS/qkbt2game/Plugins/Opus/lib/libopus.a
deleted file mode 100644
index 618a682..0000000
--- a/Channel/IOS/qkbt2game/Plugins/Opus/lib/libopus.a
+++ /dev/null
Binary files differ
--
Gitblit v1.8.0